24V DC Regulated Power Supply Schematic

Electronic Circuits

Electronics circuits are the circuits in which electronics components are widely used to achieve the required task. These are designed by well known manufacturers at high production rate as well as by undergraduate engineers for their projects. Electronic circuits include discrete components like resistors, capacitors, inductors as well as different types of IC’s (Integrated Circuits). The number of components depends upon the requirement of the circuit.

Electronic circuit’s power source can be AC (Altering Current) or DC (Direct Current). Without any external power source these circuits cannot run. In our homes (for yours ask you electricity provider or the electrician) the electricity provided by the electricity company have the voltages ~220 volts with the frequency 50-60Hz.

If any of the electronic circuit runs using DC power then the AC power source (~220) in the home switch board should be converted into DC first. Suppose if the circuit needs DC power of +24 V dc then we first use the step down transformer to step down the 220volt AC into 25 volt AC,. Then we rectify it using a rectifier. Bridge rectifier is a good choice while rectifying AC volts into DC volt. Then use capacitors for filtering the rectified voltage so that we can get a pure DC +24 volts at output.

The diagram of conversion of 220 AC volts into +24 DC volts will be uploaded soon.

Best of Luck.

Welcome to a change

We welcome you all to a place where your many of the problems going to be solved. This is the right place where you will get a satisfied solution to your problems. You will get satisfaction at the rate of only one click.

Try to check it & if you like it then tell your friend & family members too so that they will get their required solutions too.

Thankyou!